Check items to add to the cart or select all
Product Description
The slice chair is a one of a kind design which can support a person up to 110 kg / 240 pounds.
The Slice Office Chair height is:
87.9cm top to bottom
44.5cm back of the seat
46.3cm front of the seat
The Slice Office Chair depth/length is:
33.4cm seat
31.8cm bottom
53.8cm total
The Slice Office Chair width is:
38.4cm overall
38.4cm back
36.4cm seat
34.4cm bottom front
32.4cm bottom back
> Blueprints are digital PDF files and include step-by-step assembly instructions. Please include to your order.
> Laser-Cut Kits
These kits are cut and shipped right to your door, price does not include shipping. Below are the approximate dimensions of the kits once fully assembled.
Kit (10mm)
The steel nuts bolts and rods are sold separately. You will need 38 Size 10 bolts and 19 rods at 4.5mm in diameter at the following lengths:
3 x 54.2cm (2 for the back, one for the middle of the seat)
2 x 34cm (2 for the back and the front of the seat)
2 x 9.4cm (for the back of the back legs)
4 x 6.6cm (2 for right above the legs, 2 for the back legs)
6 x 5.6cm (4 for the front and back feet, 2 for under the seat)
2 x 3.6cm (2 for the middle feet)
> EPS files have had most double lines removed and optimized to fit the following boards. These are considered production licenses and are a price per cut regardless of intended purpose. They are non-transferable meaning you cannot get another person or company to cut these designs on your behalf. No commercial production or resale of model is allowed, please read our FAQ.
EPS File (10mm)
Nine files set on 38.4cm x 79cm.
The Slice Office Chair height is:
87.9cm top to bottom
44.5cm back of the seat
46.3cm front of the seat
The Slice Office Chair depth/length is:
33.4cm seat
31.8cm bottom
53.8cm total
The Slice Office Chair width is:
38.4cm overall
38.4cm back
36.4cm seat
34.4cm bottom front
32.4cm bottom back
> Blueprints are digital PDF files and include step-by-step assembly instructions. Please include to your order.
> Laser-Cut Kits
These kits are cut and shipped right to your door, price does not include shipping. Below are the approximate dimensions of the kits once fully assembled.
Kit (10mm)
The steel nuts bolts and rods are sold separately. You will need 38 Size 10 bolts and 19 rods at 4.5mm in diameter at the following lengths:
3 x 54.2cm (2 for the back, one for the middle of the seat)
2 x 34cm (2 for the back and the front of the seat)
2 x 9.4cm (for the back of the back legs)
4 x 6.6cm (2 for right above the legs, 2 for the back legs)
6 x 5.6cm (4 for the front and back feet, 2 for under the seat)
2 x 3.6cm (2 for the middle feet)
> EPS files have had most double lines removed and optimized to fit the following boards. These are considered production licenses and are a price per cut regardless of intended purpose. They are non-transferable meaning you cannot get another person or company to cut these designs on your behalf. No commercial production or resale of model is allowed, please read our FAQ.
EPS File (10mm)
Nine files set on 38.4cm x 79cm.
Additional Information
| File Type | Group |
| Skill Level | 4 - Master |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.
